2062 lines
54 KiB
Plaintext
2062 lines
54 KiB
Plaintext
##====================================================================
|
||
## EMQ X Configuration R4.0
|
||
##====================================================================
|
||
|
||
##--------------------------------------------------------------------
|
||
## Cluster
|
||
##--------------------------------------------------------------------
|
||
|
||
## Cluster name.
|
||
##
|
||
## Value: String
|
||
cluster.name = emqxcl
|
||
|
||
## Specify the erlang distributed protocol.
|
||
##
|
||
## Value: Enum
|
||
## - inet_tcp: the default; handles TCP streams with IPv4 addressing.
|
||
## - inet6_tcp: handles TCP with IPv6 addressing.
|
||
## - inet_tls: using TLS for Erlang Distribution.
|
||
##
|
||
## vm.args: -proto_dist inet_tcp
|
||
cluster.proto_dist = inet_tcp
|
||
|
||
## Cluster auto-discovery strategy.
|
||
##
|
||
## Value: Enum
|
||
## - manual: Manual join command
|
||
## - static: Static node list
|
||
## - mcast: IP Multicast
|
||
## - dns: DNS A Record
|
||
## - etcd: etcd
|
||
## - k8s: Kubernates
|
||
##
|
||
## Default: manual
|
||
cluster.discovery = manual
|
||
|
||
## Enable cluster autoheal from network partition.
|
||
##
|
||
## Value: on | off
|
||
##
|
||
## Default: on
|
||
cluster.autoheal = on
|
||
|
||
## Autoclean down node. A down node will be removed from the cluster
|
||
## if this value > 0.
|
||
##
|
||
## Value: Duration
|
||
## -h: hour, e.g. '2h' for 2 hours
|
||
## -m: minute, e.g. '5m' for 5 minutes
|
||
## -s: second, e.g. '30s' for 30 seconds
|
||
##
|
||
## Default: 5m
|
||
cluster.autoclean = 5m
|
||
|
||
##--------------------------------------------------------------------
|
||
## Cluster using static node list
|
||
|
||
## Node list of the cluster.
|
||
##
|
||
## Value: String
|
||
## cluster.static.seeds = emqx1@127.0.0.1,emqx2@127.0.0.1
|
||
|
||
##--------------------------------------------------------------------
|
||
## Cluster using IP Multicast.
|
||
|
||
## IP Multicast Address.
|
||
##
|
||
## Value: IP Address
|
||
## cluster.mcast.addr = 239.192.0.1
|
||
|
||
## Multicast Ports.
|
||
##
|
||
## Value: Port List
|
||
## cluster.mcast.ports = 4369,4370
|
||
|
||
## Multicast Iface.
|
||
##
|
||
## Value: Iface Address
|
||
##
|
||
## Default: 0.0.0.0
|
||
## cluster.mcast.iface = 0.0.0.0
|
||
|
||
## Multicast Ttl.
|
||
##
|
||
## Value: 0-255
|
||
## cluster.mcast.ttl = 255
|
||
|
||
## Multicast loop.
|
||
##
|
||
## Value: on | off
|
||
## cluster.mcast.loop = on
|
||
|
||
##--------------------------------------------------------------------
|
||
## Cluster using DNS A records.
|
||
|
||
## DNS name.
|
||
##
|
||
## Value: String
|
||
## cluster.dns.name = localhost
|
||
|
||
## The App name is used to build 'node.name' with IP address.
|
||
##
|
||
## Value: String
|
||
## cluster.dns.app = emqx
|
||
|
||
##--------------------------------------------------------------------
|
||
## Cluster using etcd
|
||
|
||
## Etcd server list, seperated by ','.
|
||
##
|
||
## Value: String
|
||
## cluster.etcd.server = http://127.0.0.1:2379
|
||
|
||
## The prefix helps build nodes path in etcd. Each node in the cluster
|
||
## will create a path in etcd: v2/keys/<prefix>/<cluster.name>/<node.name>
|
||
##
|
||
## Value: String
|
||
## cluster.etcd.prefix = emqxcl
|
||
|
||
## The TTL for node's path in etcd.
|
||
##
|
||
## Value: Duration
|
||
##
|
||
## Default: 1m, 1 minute
|
||
## cluster.etcd.node_ttl = 1m
|
||
|
||
## Path to a file containing the client's private PEM-encoded key.
|
||
##
|
||
## Value: File
|
||
## cluster.etcd.ssl.keyfile = /etc/emqx/certs/client-key.pem
|
||
|
||
## The path to a file containing the client's certificate.
|
||
##
|
||
## Value: File
|
||
## cluster.etcd.ssl.certfile = /etc/emqx/certs/client.pem
|
||
|
||
## Path to the file containing PEM-encoded CA certificates. The CA certificates
|
||
## are used during server authentication and when building the client certificate chain.
|
||
##
|
||
## Value: File
|
||
## cluster.etcd.ssl.cacertfile = /etc/emqx/certs/ca.pem
|
||
|
||
##--------------------------------------------------------------------
|
||
## Cluster using Kubernates
|
||
|
||
## Kubernates API server list, seperated by ','.
|
||
##
|
||
## Value: String
|
||
## cluster.k8s.apiserver = http://10.110.111.204:8080
|
||
|
||
## The service name helps lookup EMQ nodes in the cluster.
|
||
##
|
||
## Value: String
|
||
## cluster.k8s.service_name = emqx
|
||
|
||
## The address type is used to extract host from k8s service.
|
||
##
|
||
## Value: ip | dns | hostname
|
||
## cluster.k8s.address_type = ip
|
||
|
||
## The app name helps build 'node.name'.
|
||
##
|
||
## Value: String
|
||
## cluster.k8s.app_name = emqx
|
||
|
||
## The suffix added to dns and hostname get from k8s service
|
||
##
|
||
## Value: String
|
||
## cluster.k8s.suffix = pod.cluster.local
|
||
|
||
## Kubernates Namespace
|
||
##
|
||
## Value: String
|
||
## cluster.k8s.namespace = default
|
||
|
||
##--------------------------------------------------------------------
|
||
## Node
|
||
##--------------------------------------------------------------------
|
||
|
||
## Node name.
|
||
##
|
||
## See: http://erlang.org/doc/reference_manual/distributed.html
|
||
##
|
||
## Value: <name>@<host>
|
||
##
|
||
## Default: emqx@127.0.0.1
|
||
node.name = emqx@127.0.0.1
|
||
|
||
## Cookie for distributed node communication.
|
||
##
|
||
## Value: String
|
||
node.cookie = emqxsecretcookie
|
||
|
||
## Data dir for the node
|
||
##
|
||
## Value: Folder
|
||
node.data_dir = /var/lib/emqx
|
||
|
||
## Heartbeat monitoring of an Erlang runtime system. Comment the line to disable
|
||
## heartbeat, or set the value as 'on'
|
||
##
|
||
## Value: on
|
||
##
|
||
## vm.args: -heart
|
||
## node.heartbeat = on
|
||
|
||
## Sets the number of threads in async thread pool. Valid range is 0-1024.
|
||
##
|
||
## See: http://erlang.org/doc/man/erl.html
|
||
##
|
||
## Value: 0-1024
|
||
##
|
||
## vm.args: +A Number
|
||
node.async_threads = 32
|
||
|
||
## Sets the maximum number of simultaneously existing processes for this
|
||
## system if a Number is passed as value.
|
||
##
|
||
## See: http://erlang.org/doc/man/erl.html
|
||
##
|
||
## Value: Number [1024-134217727]
|
||
##
|
||
## vm.args: +P Number
|
||
node.process_limit = 2048000
|
||
|
||
## Sets the maximum number of simultaneously existing ports for this system.
|
||
##
|
||
## See: http://erlang.org/doc/man/erl.html
|
||
##
|
||
## Value: Number [1024-134217727]
|
||
##
|
||
## vm.args: +Q Number
|
||
node.max_ports = 1024000
|
||
|
||
## Set the distribution buffer busy limit (dist_buf_busy_limit).
|
||
##
|
||
## See: http://erlang.org/doc/man/erl.html
|
||
##
|
||
## Value: Number [1KB-2GB]
|
||
##
|
||
## vm.args: +zdbbl size
|
||
node.dist_buffer_size = 8MB
|
||
|
||
## Sets the maximum number of ETS tables. Note that mnesia and SSL will
|
||
## create temporary ETS tables.
|
||
##
|
||
## Value: Number
|
||
##
|
||
## vm.args: +e Number
|
||
node.max_ets_tables = 256000
|
||
|
||
## Tweak GC to run more often.
|
||
##
|
||
## Value: Number [0-65535]
|
||
##
|
||
## vm.args: -env ERL_FULLSWEEP_AFTER Number
|
||
node.fullsweep_after = 1000
|
||
|
||
## Crash dump log file.
|
||
##
|
||
## Value: Log file
|
||
node.crash_dump = /var/log/emqx/crash.dump
|
||
|
||
## Specify SSL Options in the file if using SSL for Erlang Distribution.
|
||
##
|
||
## Value: File
|
||
##
|
||
## vm.args: -ssl_dist_optfile <File>
|
||
## node.ssl_dist_optfile = /etc/emqx/ssl_dist.conf
|
||
|
||
## Sets the net_kernel tick time. TickTime is specified in seconds.
|
||
## Notice that all communicating nodes are to have the same TickTime
|
||
## value specified.
|
||
##
|
||
## See: http://www.erlang.org/doc/man/kernel_app.html#net_ticktime
|
||
##
|
||
## Value: Number
|
||
##
|
||
## vm.args: -kernel net_ticktime Number
|
||
node.dist_net_ticktime = 60
|
||
|
||
## Sets the port range for the listener socket of a distributed Erlang node.
|
||
## Note that if there are firewalls between clustered nodes, this port segment
|
||
## for nodes’ communication should be allowed.
|
||
##
|
||
## See: http://www.erlang.org/doc/man/kernel_app.html
|
||
##
|
||
## Value: Port [1024-65535]
|
||
node.dist_listen_min = 6369
|
||
node.dist_listen_max = 6369
|
||
|
||
##--------------------------------------------------------------------
|
||
## RPC
|
||
##--------------------------------------------------------------------
|
||
## RPC Mode.
|
||
##
|
||
## Value: sync | async
|
||
rpc.mode = async
|
||
|
||
## Max batch size of async RPC requests.
|
||
##
|
||
## Value: Integer
|
||
## Zero or negative value disables rpc batching.
|
||
##
|
||
## NOTE: RPC batch won't work when rpc.mode = sync
|
||
rpc.async_batch_size = 256
|
||
|
||
## TCP server port for RPC.
|
||
##
|
||
## Value: Port [1024-65535]
|
||
rpc.tcp_server_port = 5369
|
||
|
||
## TCP port for outgoing RPC connections.
|
||
##
|
||
## Value: Port [1024-65535]
|
||
rpc.tcp_client_port = 5369
|
||
|
||
## Number of utgoing RPC connections.
|
||
##
|
||
## Value: Interger [1-256]
|
||
rpc.tcp_client_num = 32
|
||
|
||
## RCP Client connect timeout.
|
||
##
|
||
## Value: Seconds
|
||
rpc.connect_timeout = 5s
|
||
|
||
## TCP send timeout of RPC client and server.
|
||
##
|
||
## Value: Seconds
|
||
rpc.send_timeout = 5s
|
||
|
||
## Authentication timeout
|
||
##
|
||
## Value: Seconds
|
||
rpc.authentication_timeout = 5s
|
||
|
||
## Default receive timeout for call() functions
|
||
##
|
||
## Value: Seconds
|
||
rpc.call_receive_timeout = 15s
|
||
|
||
## Socket idle keepalive.
|
||
##
|
||
## Value: Seconds
|
||
rpc.socket_keepalive_idle = 900s
|
||
|
||
## TCP Keepalive probes interval.
|
||
##
|
||
## Value: Seconds
|
||
rpc.socket_keepalive_interval = 75s
|
||
|
||
## Probes lost to close the connection
|
||
##
|
||
## Value: Integer
|
||
rpc.socket_keepalive_count = 9
|
||
|
||
## Size of TCP send buffer.
|
||
##
|
||
## Value: Bytes
|
||
rpc.socket_sndbuf = 1MB
|
||
|
||
## Size of TCP receive buffer.
|
||
##
|
||
## Value: Seconds
|
||
rpc.socket_recbuf = 1MB
|
||
|
||
## Size of user-level software socket buffer.
|
||
##
|
||
## Value: Seconds
|
||
rpc.socket_buffer = 1MB
|
||
|
||
##--------------------------------------------------------------------
|
||
## Log
|
||
##--------------------------------------------------------------------
|
||
|
||
## Where to emit the logs.
|
||
## Enable the console (standard output) logs.
|
||
##
|
||
## Value: off | file | console | both
|
||
## - off: disable logs entirely
|
||
## - file: write logs only to file
|
||
## - console: write logs only to standard I/O
|
||
## - both: write logs both to file and standard I/O
|
||
log.to = both
|
||
|
||
## The log severity level.
|
||
##
|
||
## Value: debug | info | notice | warning | error | critical | alert | emergency
|
||
##
|
||
## Note: Only the messages with severity level higher than or equal to
|
||
## this level will be logged.
|
||
##
|
||
## Default: warning
|
||
log.level = warning
|
||
|
||
## The dir for log files.
|
||
##
|
||
## Value: Folder
|
||
log.dir = /var/log/emqx
|
||
|
||
## The log filename for logs of level specified in "log.level".
|
||
##
|
||
## Value: String
|
||
## Default: emqx.log
|
||
log.file = emqx.log
|
||
|
||
## Limits the total number of characters printed for each log event.
|
||
##
|
||
## Value: Integer
|
||
## Default: No Limit
|
||
#log.chars_limit = 8192
|
||
|
||
## Maximum size of each log file.
|
||
##
|
||
## Value: Number
|
||
## Default: 10M
|
||
## Supported Unit: KB | MB | GB
|
||
log.rotation.size = 10MB
|
||
|
||
## Maximum rotation count of log files.
|
||
##
|
||
## Value: Number
|
||
## Default: 5
|
||
log.rotation.count = 5
|
||
|
||
## To create additional log files for specific log levels.
|
||
##
|
||
## Value: File Name
|
||
## Format: log.$level.file = $filename,
|
||
## where "$level" can be one of: debug, info, notice, warning,
|
||
## error, critical, alert, emergency
|
||
## Note: Log files for a specific log level will only contain all the logs
|
||
## that higher than or equal to that level
|
||
##
|
||
#log.info.file = info.log
|
||
#log.error.file = error.log
|
||
|
||
##--------------------------------------------------------------------
|
||
## Authentication/Access Control
|
||
##--------------------------------------------------------------------
|
||
|
||
## Allow anonymous authentication by default if no auth plugins loaded.
|
||
## Notice: Disable the option in production deployment!
|
||
##
|
||
## Value: true | false
|
||
allow_anonymous = false
|
||
|
||
## Allow or deny if no ACL rules matched.
|
||
##
|
||
## Value: allow | deny
|
||
acl_nomatch = allow
|
||
|
||
## Default ACL File.
|
||
##
|
||
## Value: File Name
|
||
acl_file = /etc/emqx/acl.conf
|
||
|
||
## Whether to enable ACL cache.
|
||
##
|
||
## If enabled, ACLs roles for each client will be cached in the memory
|
||
##
|
||
## Value: on | off
|
||
enable_acl_cache = on
|
||
|
||
## The maximum count of ACL entries can be cached for a client.
|
||
##
|
||
## Value: Integer greater than 0
|
||
## Default: 32
|
||
acl_cache_max_size = 32
|
||
|
||
## The time after which an ACL cache entry will be deleted
|
||
##
|
||
## Value: Duration
|
||
## Default: 1 minute
|
||
acl_cache_ttl = 1m
|
||
|
||
## The action when acl check reject current operation
|
||
##
|
||
## Value: ignore | disconnect
|
||
## Default: ignore
|
||
acl_deny_action = ignore
|
||
|
||
## Specify the global flapping detect policy.
|
||
## The value is a string composed of flapping threshold, duration and banned interval.
|
||
## 1. threshold: an integer to specfify the disconnected times of a MQTT Client;
|
||
## 2. duration: the time window for flapping detect;
|
||
## 3. banned interval: the banned interval if a flapping is detected.
|
||
##
|
||
## Value: Integer,Duration,Duration
|
||
flapping_detect_policy = 30, 1m, 5m
|
||
|
||
##--------------------------------------------------------------------
|
||
## MQTT Protocol
|
||
##--------------------------------------------------------------------
|
||
|
||
## Maximum MQTT packet size allowed.
|
||
##
|
||
## Value: Bytes
|
||
## Default: 1MB
|
||
mqtt.max_packet_size = 1MB
|
||
|
||
## Maximum length of MQTT clientId allowed.
|
||
##
|
||
## Value: Number [23-65535]
|
||
mqtt.max_clientid_len = 65535
|
||
|
||
## Maximum topic levels allowed. 0 means no limit.
|
||
##
|
||
## Value: Number
|
||
mqtt.max_topic_levels = 0
|
||
|
||
## Maximum QoS allowed.
|
||
##
|
||
## Value: 0 | 1 | 2
|
||
mqtt.max_qos_allowed = 2
|
||
|
||
## Maximum Topic Alias, 0 means no topic alias supported.
|
||
##
|
||
## Value: 0-65535
|
||
mqtt.max_topic_alias = 65535
|
||
|
||
## Whether the Server supports MQTT retained messages.
|
||
##
|
||
## Value: boolean
|
||
mqtt.retain_available = true
|
||
|
||
## Whether the Server supports MQTT Wildcard Subscriptions
|
||
##
|
||
## Value: boolean
|
||
mqtt.wildcard_subscription = true
|
||
|
||
## Whether the Server supports MQTT Shared Subscriptions.
|
||
##
|
||
## Value: boolean
|
||
mqtt.shared_subscription = true
|
||
|
||
## Whether to ignore loop delivery of messages.(for mqtt v3.1.1)
|
||
##
|
||
## Value: true | false
|
||
mqtt.ignore_loop_deliver = false
|
||
|
||
## Whether to parse the MQTT frame in strict mode
|
||
##
|
||
## Value: true | false
|
||
mqtt.strict_mode = false
|
||
|
||
##--------------------------------------------------------------------
|
||
## Zones
|
||
##--------------------------------------------------------------------
|
||
|
||
##--------------------------------------------------------------------
|
||
## External Zone
|
||
|
||
## Idle timeout of the external MQTT connections.
|
||
##
|
||
## Value: duration
|
||
zone.external.idle_timeout = 15s
|
||
|
||
## Hibernate after a duration of idle state.
|
||
##
|
||
## Value: duration
|
||
zone.external.hibernate_after = 60s
|
||
|
||
## Publish limit for the external MQTT connections.
|
||
##
|
||
## Value: Number,Duration
|
||
## Example: 100 messages per 10 seconds.
|
||
## zone.external.publish_limit = 100,10s
|
||
|
||
## Enable ACL check.
|
||
##
|
||
## Value: Flag
|
||
zone.external.enable_acl = on
|
||
|
||
## Enable ban check.
|
||
##
|
||
## Value: Flag
|
||
zone.external.enable_ban = on
|
||
|
||
## Enable per connection statistics.
|
||
##
|
||
## Value: on | off
|
||
zone.external.enable_stats = on
|
||
|
||
## The action when acl check reject current operation
|
||
##
|
||
## Value: ignore | disconnect
|
||
## Default: ignore
|
||
zone.external.acl_deny_action = ignore
|
||
|
||
## Force MQTT connection/session process GC after this number of
|
||
## messages | bytes passed through.
|
||
##
|
||
## Numbers delimited by `|'. Zero or negative is to disable.
|
||
zone.external.force_gc_policy = 1000|1MB
|
||
|
||
## Max message queue length and total heap size to force shutdown
|
||
## connection/session process.
|
||
## Message queue here is the Erlang process mailbox, but not the number
|
||
## of queued MQTT messages of QoS 1 and 2.
|
||
##
|
||
## Numbers delimited by `|'. Zero or negative is to disable.
|
||
##
|
||
## Default:
|
||
## - 10000|32MB on ARCH_64 system
|
||
## - 10000|16MB on ARCH_32 sytem
|
||
## zone.external.force_shutdown_policy = 10000|32MB
|
||
|
||
## Maximum MQTT packet size allowed.
|
||
##
|
||
## Value: Bytes
|
||
## Default: 1MB
|
||
## zone.external.max_packet_size = 64KB
|
||
|
||
## Maximum length of MQTT clientId allowed.
|
||
##
|
||
## Value: Number [23-65535]
|
||
## zone.external.max_clientid_len = 1024
|
||
|
||
## Maximum topic levels allowed. 0 means no limit.
|
||
##
|
||
## Value: Number
|
||
## zone.external.max_topic_levels = 7
|
||
|
||
## Maximum QoS allowed.
|
||
##
|
||
## Value: 0 | 1 | 2
|
||
## zone.external.max_qos_allowed = 2
|
||
|
||
## Maximum Topic Alias, 0 means no limit.
|
||
##
|
||
## Value: 0-65535
|
||
## zone.external.max_topic_alias = 65535
|
||
|
||
## Whether the Server supports retained messages.
|
||
##
|
||
## Value: boolean
|
||
## zone.external.retain_available = true
|
||
|
||
## Whether the Server supports Wildcard Subscriptions
|
||
##
|
||
## Value: boolean
|
||
## zone.external.wildcard_subscription = false
|
||
|
||
## Whether the Server supports Shared Subscriptions
|
||
##
|
||
## Value: boolean
|
||
## zone.external.shared_subscription = false
|
||
|
||
## Server Keep Alive
|
||
##
|
||
## Value: Number
|
||
## zone.external.server_keepalive = 0
|
||
|
||
## The backoff for MQTT keepalive timeout. The broker will kick a connection out
|
||
## until 'Keepalive * backoff * 2' timeout.
|
||
##
|
||
## Value: Float > 0.5
|
||
zone.external.keepalive_backoff = 0.75
|
||
|
||
## Maximum number of subscriptions allowed, 0 means no limit.
|
||
##
|
||
## Value: Number
|
||
zone.external.max_subscriptions = 0
|
||
|
||
## Force to upgrade QoS according to subscription.
|
||
##
|
||
## Value: on | off
|
||
zone.external.upgrade_qos = off
|
||
|
||
## Maximum size of the Inflight Window storing QoS1/2 messages delivered but unacked.
|
||
##
|
||
## Value: Number
|
||
zone.external.max_inflight = 32
|
||
|
||
## Retry interval for QoS1/2 message delivering.
|
||
##
|
||
## Value: Duration
|
||
zone.external.retry_interval = 30s
|
||
|
||
## Maximum QoS2 packets (Client -> Broker) awaiting PUBREL, 0 means no limit.
|
||
##
|
||
## Value: Number
|
||
zone.external.max_awaiting_rel = 100
|
||
|
||
## The QoS2 messages (Client -> Broker) will be dropped if awaiting PUBREL timeout.
|
||
##
|
||
## Value: Duration
|
||
zone.external.await_rel_timeout = 300s
|
||
|
||
## Default session expiry interval for MQTT V3.1.1 connections.
|
||
##
|
||
## Value: Duration
|
||
## -d: day
|
||
## -h: hour
|
||
## -m: minute
|
||
## -s: second
|
||
##
|
||
## Default: 2h, 2 hours
|
||
zone.external.session_expiry_interval = 2h
|
||
|
||
## Maximum queue length. Enqueued messages when persistent client disconnected,
|
||
## or inflight window is full. 0 means no limit.
|
||
##
|
||
## Value: Number >= 0
|
||
zone.external.max_mqueue_len = 1000
|
||
|
||
## Topic priorities.
|
||
## 'none' to indicate no priority table (by default), hence all messages
|
||
## are treated equal
|
||
##
|
||
## Priority number [1-255]
|
||
## Example: topic/1=10,topic/2=8
|
||
## NOTE: comma and equal signs are not allowed for priority topic names
|
||
## NOTE: messages for topics not in the priority table are treated as
|
||
## either highest or lowest priority depending on the configured
|
||
## value for mqueue_default_priority
|
||
##
|
||
zone.external.mqueue_priorities = none
|
||
|
||
## Default to highest priority for topics not matching priority table
|
||
##
|
||
## Value: highest | lowest
|
||
zone.external.mqueue_default_priority = highest
|
||
|
||
## Whether to enqueue QoS0 messages.
|
||
##
|
||
## Value: false | true
|
||
zone.external.mqueue_store_qos0 = true
|
||
|
||
## Whether to turn on flapping detect
|
||
##
|
||
## Value: on | off
|
||
zone.external.enable_flapping_detect = off
|
||
|
||
## All the topics will be prefixed with the mountpoint path if this option is enabled.
|
||
##
|
||
## Variables in mountpoint path:
|
||
## - %c: clientid
|
||
## - %u: username
|
||
##
|
||
## Value: String
|
||
## zone.external.mountpoint = devicebound/
|
||
|
||
## Whether use username replace client id
|
||
##
|
||
## Value: boolean
|
||
## Default: false
|
||
zone.external.use_username_as_clientid = false
|
||
|
||
## Whether to ignore loop delivery of messages.(for mqtt v3.1.1)
|
||
##
|
||
## Value: true | false
|
||
zone.external.ignore_loop_deliver = false
|
||
|
||
## Whether to parse the MQTT frame in strict mode
|
||
##
|
||
## Value: true | false
|
||
zone.external.strict_mode = false
|
||
|
||
##--------------------------------------------------------------------
|
||
## Internal Zone
|
||
|
||
zone.internal.allow_anonymous = true
|
||
|
||
## Enable per connection stats.
|
||
##
|
||
## Value: Flag
|
||
zone.internal.enable_stats = on
|
||
|
||
## Enable ACL check.
|
||
##
|
||
## Value: Flag
|
||
zone.internal.enable_acl = off
|
||
|
||
## The action when acl check reject current operation
|
||
##
|
||
## Value: ignore | disconnect
|
||
## Default: ignore
|
||
zone.internal.acl_deny_action = ignore
|
||
|
||
## See zone.$name.wildcard_subscription.
|
||
##
|
||
## Value: boolean
|
||
## zone.internal.wildcard_subscription = true
|
||
|
||
## See zone.$name.shared_subscription.
|
||
##
|
||
## Value: boolean
|
||
## zone.internal.shared_subscription = true
|
||
|
||
## See zone.$name.max_subscriptions.
|
||
##
|
||
## Value: Integer
|
||
zone.internal.max_subscriptions = 0
|
||
|
||
## See zone.$name.max_inflight
|
||
##
|
||
## Value: Number
|
||
zone.internal.max_inflight = 128
|
||
|
||
## See zone.$name.max_awaiting_rel
|
||
##
|
||
## Value: Number
|
||
zone.internal.max_awaiting_rel = 1000
|
||
|
||
## See zone.$name.max_mqueue_len
|
||
##
|
||
## Value: Number >= 0
|
||
zone.internal.max_mqueue_len = 10000
|
||
|
||
## Whether to enqueue Qos0 messages.
|
||
##
|
||
## Value: false | true
|
||
zone.internal.mqueue_store_qos0 = true
|
||
|
||
## Whether to turn on flapping detect
|
||
##
|
||
## Value: on | off
|
||
zone.internal.enable_flapping_detect = off
|
||
|
||
## See zone.$name.force_shutdown_policy
|
||
##
|
||
## Default:
|
||
## - 10000|32MB on ARCH_64 system
|
||
## - 10000|16MB on ARCH_32 sytem
|
||
zone.internal.force_shutdown_policy = 100000|64MB
|
||
|
||
## All the topics will be prefixed with the mountpoint path if this option is enabled.
|
||
##
|
||
## Variables in mountpoint path:
|
||
## - %c: clientid
|
||
## - %u: username
|
||
##
|
||
## Value: String
|
||
## zone.internal.mountpoint = cloudbound/
|
||
|
||
## Whether to ignore loop delivery of messages.(for mqtt v3.1.1)
|
||
##
|
||
## Value: true | false
|
||
zone.internal.ignore_loop_deliver = false
|
||
|
||
## Whether to parse the MQTT frame in strict mode
|
||
##
|
||
## Value: true | false
|
||
zone.internal.strict_mode = false
|
||
|
||
##--------------------------------------------------------------------
|
||
## Listeners
|
||
##--------------------------------------------------------------------
|
||
|
||
##--------------------------------------------------------------------
|
||
## MQTT/TCP - External TCP Listener for MQTT Protocol
|
||
|
||
## listener.tcp.$name is the IP address and port that the MQTT/TCP
|
||
## listener will bind.
|
||
##
|
||
## Value: IP:Port | Port
|
||
##
|
||
## Examples: 1883, 127.0.0.1:1883, ::1:1883
|
||
listener.tcp.external = 0.0.0.0:1883
|
||
|
||
## The acceptor pool for external MQTT/TCP listener.
|
||
##
|
||
## Value: Number
|
||
listener.tcp.external.acceptors = 8
|
||
|
||
## Maximum number of concurrent MQTT/TCP connections.
|
||
##
|
||
## Value: Number
|
||
listener.tcp.external.max_connections = 1024000
|
||
|
||
## Maximum external connections per second.
|
||
##
|
||
## Value: Number
|
||
listener.tcp.external.max_conn_rate = 1000
|
||
|
||
## Specify the {active, N} option for the external MQTT/TCP Socket.
|
||
##
|
||
## Value: Number
|
||
listener.tcp.external.active_n = 100
|
||
|
||
## Zone of the external MQTT/TCP listener belonged to.
|
||
##
|
||
## See: zone.$name.*
|
||
##
|
||
## Value: String
|
||
listener.tcp.external.zone = external
|
||
|
||
## Rate limit for the external MQTT/TCP connections. Format is 'limit,duration'.
|
||
##
|
||
## Value: limit,duration
|
||
## Default: 100KB incoming per 10 seconds.
|
||
## listener.tcp.external.rate_limit = 100KB,10s
|
||
|
||
## The access control rules for the MQTT/TCP listener.
|
||
##
|
||
## See: https://github.com/emqtt/esockd#allowdeny
|
||
##
|
||
## Value: ACL Rule
|
||
##
|
||
## Example: allow 192.168.0.0/24
|
||
listener.tcp.external.access.1 = allow all
|
||
|
||
## Enable the Proxy Protocol V1/2 if the EMQ X cluster is deployed
|
||
## behind HAProxy or Nginx.
|
||
##
|
||
## See: https://www.haproxy.com/blog/haproxy/proxy-protocol/
|
||
##
|
||
## Value: on | off
|
||
## listener.tcp.external.proxy_protocol = on
|
||
|
||
## Sets the timeout for proxy protocol. EMQ X will close the TCP connection
|
||
## if no proxy protocol packet recevied within the timeout.
|
||
##
|
||
## Value: Duration
|
||
## listener.tcp.external.proxy_protocol_timeout = 3s
|
||
|
||
## Enable the option for X.509 certificate based authentication.
|
||
## EMQX will use the common name of certificate as MQTT username.
|
||
##
|
||
## Value: cn | dn | crt
|
||
## listener.tcp.external.peer_cert_as_username = cn
|
||
|
||
## The TCP backlog defines the maximum length that the queue of pending
|
||
## connections can grow to.
|
||
##
|
||
## Value: Number >= 0
|
||
listener.tcp.external.backlog = 1024
|
||
|
||
## The TCP send timeout for external MQTT connections.
|
||
##
|
||
## Value: Duration
|
||
listener.tcp.external.send_timeout = 15s
|
||
|
||
## Close the TCP connection if send timeout.
|
||
##
|
||
## Value: on | off
|
||
listener.tcp.external.send_timeout_close = on
|
||
|
||
## The TCP receive buffer(os kernel) for MQTT connections.
|
||
##
|
||
## See: http://erlang.org/doc/man/inet.html
|
||
##
|
||
## Value: Bytes
|
||
## listener.tcp.external.recbuf = 2KB
|
||
|
||
## The TCP send buffer(os kernel) for MQTT connections.
|
||
##
|
||
## See: http://erlang.org/doc/man/inet.html
|
||
##
|
||
## Value: Bytes
|
||
## listener.tcp.external.sndbuf = 2KB
|
||
|
||
## The size of the user-level software buffer used by the driver.
|
||
## Not to be confused with options sndbuf and recbuf, which correspond
|
||
## to the Kernel socket buffers. It is recommended to have val(buffer)
|
||
## >= max(val(sndbuf),val(recbuf)) to avoid performance issues because
|
||
## of unnecessary copying. val(buffer) is automatically set to the above
|
||
## maximum when values sndbuf or recbuf are set.
|
||
##
|
||
## See: http://erlang.org/doc/man/inet.html
|
||
##
|
||
## Value: Bytes
|
||
## listener.tcp.external.buffer = 2KB
|
||
|
||
## Sets the 'buffer = max(sndbuf, recbuf)' if this option is enabled.
|
||
##
|
||
## Value: on | off
|
||
## listener.tcp.external.tune_buffer = off
|
||
|
||
## The TCP_NODELAY flag for MQTT connections. Small amounts of data are
|
||
## sent immediately if the option is enabled.
|
||
##
|
||
## Value: true | false
|
||
listener.tcp.external.nodelay = true
|
||
|
||
## The SO_REUSEADDR flag for TCP listener.
|
||
##
|
||
## Value: true | false
|
||
listener.tcp.external.reuseaddr = true
|
||
|
||
##--------------------------------------------------------------------
|
||
## Internal TCP Listener for MQTT Protocol
|
||
|
||
## The IP address and port that the internal MQTT/TCP protocol listener
|
||
## will bind.
|
||
##
|
||
## Value: IP:Port, Port
|
||
##
|
||
## Examples: 11883, 127.0.0.1:11883, ::1:11883
|
||
listener.tcp.internal = 127.0.0.1:11883
|
||
|
||
## The acceptor pool for internal MQTT/TCP listener.
|
||
##
|
||
## Value: Number
|
||
listener.tcp.internal.acceptors = 4
|
||
|
||
## Maximum number of concurrent MQTT/TCP connections.
|
||
##
|
||
## Value: Number
|
||
listener.tcp.internal.max_connections = 1024000
|
||
|
||
## Maximum internal connections per second.
|
||
##
|
||
## Value: Number
|
||
listener.tcp.internal.max_conn_rate = 1000
|
||
|
||
## Specify the {active, N} option for the internal MQTT/TCP Socket.
|
||
##
|
||
## Value: Number
|
||
listener.tcp.internal.active_n = 1000
|
||
|
||
## Zone of the internal MQTT/TCP listener belonged to.
|
||
##
|
||
## Value: String
|
||
listener.tcp.internal.zone = internal
|
||
|
||
## Rate limit for the internal MQTT/TCP connections.
|
||
##
|
||
## See: listener.tcp.$name.rate_limit
|
||
##
|
||
## Value: limit,duration
|
||
## Default: 1MB incoming per second.
|
||
## listener.tcp.internal.rate_limit = 1MB,1s
|
||
|
||
## The TCP backlog of internal MQTT/TCP Listener.
|
||
##
|
||
## See: listener.tcp.$name.backlog
|
||
##
|
||
## Value: Number >= 0
|
||
listener.tcp.internal.backlog = 512
|
||
|
||
## The TCP send timeout for internal MQTT connections.
|
||
##
|
||
## See: listener.tcp.$name.send_timeout
|
||
##
|
||
## Value: Duration
|
||
listener.tcp.internal.send_timeout = 5s
|
||
|
||
## Close the MQTT/TCP connection if send timeout.
|
||
##
|
||
## See: listener.tcp.$name.send_timeout_close
|
||
##
|
||
## Value: on | off
|
||
listener.tcp.internal.send_timeout_close = on
|
||
|
||
## The TCP receive buffer(os kernel) for internal MQTT connections.
|
||
##
|
||
## See: listener.tcp.$name.recbuf
|
||
##
|
||
## Value: Bytes
|
||
listener.tcp.internal.recbuf = 64KB
|
||
|
||
## The TCP send buffer(os kernel) for internal MQTT connections.
|
||
##
|
||
## See: http://erlang.org/doc/man/inet.html
|
||
##
|
||
## Value: Bytes
|
||
listener.tcp.internal.sndbuf = 64KB
|
||
|
||
## The size of the user-level software buffer used by the driver.
|
||
##
|
||
## See: listener.tcp.$name.buffer
|
||
##
|
||
## Value: Bytes
|
||
## listener.tcp.internal.buffer = 16KB
|
||
|
||
## Sets the 'buffer = max(sndbuf, recbuf)' if this option is enabled.
|
||
##
|
||
## See: listener.tcp.$name.tune_buffer
|
||
##
|
||
## Value: on | off
|
||
## listener.tcp.internal.tune_buffer = off
|
||
|
||
## The TCP_NODELAY flag for internal MQTT connections.
|
||
##
|
||
## See: listener.tcp.$name.nodelay
|
||
##
|
||
## Value: true | false
|
||
listener.tcp.internal.nodelay = false
|
||
|
||
## The SO_REUSEADDR flag for MQTT/TCP Listener.
|
||
##
|
||
## Value: true | false
|
||
listener.tcp.internal.reuseaddr = true
|
||
|
||
##--------------------------------------------------------------------
|
||
## MQTT/SSL - External SSL Listener for MQTT Protocol
|
||
|
||
## listener.ssl.$name is the IP address and port that the MQTT/SSL
|
||
## listener will bind.
|
||
##
|
||
## Value: IP:Port | Port
|
||
##
|
||
## Examples: 8883, 127.0.0.1:8883, ::1:8883
|
||
listener.ssl.external = 8883
|
||
|
||
## The acceptor pool for external MQTT/SSL listener.
|
||
##
|
||
## Value: Number
|
||
listener.ssl.external.acceptors = 16
|
||
|
||
## Maximum number of concurrent MQTT/SSL connections.
|
||
##
|
||
## Value: Number
|
||
listener.ssl.external.max_connections = 102400
|
||
|
||
## Maximum MQTT/SSL connections per second.
|
||
##
|
||
## Value: Number
|
||
listener.ssl.external.max_conn_rate = 500
|
||
|
||
## Specify the {active, N} option for the internal MQTT/SSL Socket.
|
||
##
|
||
## Value: Number
|
||
listener.ssl.external.active_n = 100
|
||
|
||
## Zone of the external MQTT/SSL listener belonged to.
|
||
##
|
||
## Value: String
|
||
listener.ssl.external.zone = external
|
||
|
||
## The access control rules for the MQTT/SSL listener.
|
||
##
|
||
## See: listener.tcp.$name.access
|
||
##
|
||
## Value: ACL Rule
|
||
listener.ssl.external.access.1 = allow all
|
||
|
||
## Rate limit for the external MQTT/SSL connections.
|
||
##
|
||
## Value: limit,duration
|
||
## Default: 100KB incoming per 10 seconds.
|
||
## listener.ssl.external.rate_limit = 100KB,10s
|
||
|
||
## Enable the Proxy Protocol V1/2 if the EMQ cluster is deployed behind
|
||
## HAProxy or Nginx.
|
||
##
|
||
## See: listener.tcp.$name.proxy_protocol
|
||
##
|
||
## Value: on | off
|
||
## listener.ssl.external.proxy_protocol = on
|
||
|
||
## Sets the timeout for proxy protocol.
|
||
##
|
||
## See: listener.tcp.$name.proxy_protocol_timeout
|
||
##
|
||
## Value: Duration
|
||
## listener.ssl.external.proxy_protocol_timeout = 3s
|
||
|
||
## TLS versions only to protect from POODLE attack.
|
||
##
|
||
## See: http://erlang.org/doc/man/ssl.html
|
||
##
|
||
## Value: String, seperated by ','
|
||
## listener.ssl.external.tls_versions = tlsv1.2,tlsv1.1,tlsv1
|
||
|
||
## TLS Handshake timeout.
|
||
##
|
||
## Value: Duration
|
||
listener.ssl.external.handshake_timeout = 15s
|
||
|
||
## Path to the file containing the user's private PEM-encoded key.
|
||
##
|
||
## See: http://erlang.org/doc/man/ssl.html
|
||
##
|
||
## Value: File
|
||
listener.ssl.external.keyfile = /etc/emqx/certs/key.pem
|
||
|
||
## Path to a file containing the user certificate.
|
||
##
|
||
## See: http://erlang.org/doc/man/ssl.html
|
||
##
|
||
## Value: File
|
||
listener.ssl.external.certfile = /etc/emqx/certs/cert.pem
|
||
|
||
## Path to the file containing PEM-encoded CA certificates. The CA certificates
|
||
## are used during server authentication and when building the client certificate chain.
|
||
##
|
||
## Value: File
|
||
## listener.ssl.external.cacertfile = /etc/emqx/certs/cacert.pem
|
||
|
||
## The Ephemeral Diffie-Helman key exchange is a very effective way of
|
||
## ensuring Forward Secrecy by exchanging a set of keys that never hit
|
||
## the wire. Since the DH key is effectively signed by the private key,
|
||
## it needs to be at least as strong as the private key. In addition,
|
||
## the default DH groups that most of the OpenSSL installations have
|
||
## are only a handful (since they are distributed with the OpenSSL
|
||
## package that has been built for the operating system it’s running on)
|
||
## and hence predictable (not to mention, 1024 bits only).
|
||
## In order to escape this situation, first we need to generate a fresh,
|
||
## strong DH group, store it in a file and then use the option above,
|
||
## to force our SSL application to use the new DH group. Fortunately,
|
||
## OpenSSL provides us with a tool to do that. Simply run:
|
||
## openssl dhparam -out dh-params.pem 2048
|
||
##
|
||
## Value: File
|
||
## listener.ssl.external.dhfile = /etc/emqx/certs/dh-params.pem
|
||
|
||
## A server only does x509-path validation in mode verify_peer,
|
||
## as it then sends a certificate request to the client (this
|
||
## message is not sent if the verify option is verify_none).
|
||
## You can then also want to specify option fail_if_no_peer_cert.
|
||
## More information at: http://erlang.org/doc/man/ssl.html
|
||
##
|
||
## Value: verify_peer | verify_none
|
||
## listener.ssl.external.verify = verify_peer
|
||
|
||
## Used together with {verify, verify_peer} by an SSL server. If set to true,
|
||
## the server fails if the client does not have a certificate to send, that is,
|
||
## sends an empty certificate.
|
||
##
|
||
## Value: true | false
|
||
## listener.ssl.external.fail_if_no_peer_cert = true
|
||
|
||
## This is the single most important configuration option of an Erlang SSL
|
||
## application. Ciphers (and their ordering) define the way the client and
|
||
## server encrypt information over the wire, from the initial Diffie-Helman
|
||
## key exchange, the session key encryption ## algorithm and the message
|
||
## digest algorithm. Selecting a good cipher suite is critical for the
|
||
## application’s data security, confidentiality and performance.
|
||
##
|
||
## The cipher list above offers:
|
||
##
|
||
## A good balance between compatibility with older browsers.
|
||
## It can get stricter for Machine-To-Machine scenarios.
|
||
## Perfect Forward Secrecy.
|
||
## No old/insecure encryption and HMAC algorithms
|
||
##
|
||
## Most of it was copied from Mozilla’s Server Side TLS article
|
||
##
|
||
## Value: Ciphers
|
||
listener.ssl.external.ciphers = ECDHE-ECDSA-AES256-GCM-SHA384,ECDHE-RSA-AES256-GCM-SHA384,ECDHE-ECDSA-AES256-SHA384,ECDHE-RSA-AES256-SHA384,ECDHE-ECDSA-DES-CBC3-SHA,ECDH-ECDSA-AES256-GCM-SHA384,ECDH-RSA-AES256-GCM-SHA384,ECDH-ECDSA-AES256-SHA384,ECDH-RSA-AES256-SHA384,DHE-DSS-AES256-GCM-SHA384,DHE-DSS-AES256-SHA256,AES256-GCM-SHA384,AES256-SHA256,ECDHE-ECDSA-AES128-GCM-SHA256,ECDHE-RSA-AES128-GCM-SHA256,ECDHE-ECDSA-AES128-SHA256,ECDHE-RSA-AES128-SHA256,ECDH-ECDSA-AES128-GCM-SHA256,ECDH-RSA-AES128-GCM-SHA256,ECDH-ECDSA-AES128-SHA256,ECDH-RSA-AES128-SHA256,DHE-DSS-AES128-GCM-SHA256,DHE-DSS-AES128-SHA256,AES128-GCM-SHA256,AES128-SHA256,ECDHE-ECDSA-AES256-SHA,ECDHE-RSA-AES256-SHA,DHE-DSS-AES256-SHA,ECDH-ECDSA-AES256-SHA,ECDH-RSA-AES256-SHA,AES256-SHA,ECDHE-ECDSA-AES128-SHA,ECDHE-RSA-AES128-SHA,DHE-DSS-AES128-SHA,ECDH-ECDSA-AES128-SHA,ECDH-RSA-AES128-SHA,AES128-SHA
|
||
|
||
## Ciphers for TLS PSK.
|
||
## Note that 'listener.ssl.external.ciphers' and 'listener.ssl.external.psk_ciphers' cannot
|
||
## be configured at the same time.
|
||
## See 'https://tools.ietf.org/html/rfc4279#section-2'.
|
||
#listener.ssl.external.psk_ciphers = PSK-AES128-CBC-SHA,PSK-AES256-CBC-SHA,PSK-3DES-EDE-CBC-SHA,PSK-RC4-SHA
|
||
|
||
## SSL parameter renegotiation is a feature that allows a client and a server
|
||
## to renegotiate the parameters of the SSL connection on the fly.
|
||
## RFC 5746 defines a more secure way of doing this. By enabling secure renegotiation,
|
||
## you drop support for the insecure renegotiation, prone to MitM attacks.
|
||
##
|
||
## Value: on | off
|
||
## listener.ssl.external.secure_renegotiate = off
|
||
|
||
## A performance optimization setting, it allows clients to reuse
|
||
## pre-existing sessions, instead of initializing new ones.
|
||
## Read more about it here.
|
||
##
|
||
## See: http://erlang.org/doc/man/ssl.html
|
||
##
|
||
## Value: on | off
|
||
## listener.ssl.external.reuse_sessions = on
|
||
|
||
## An important security setting, it forces the cipher to be set based
|
||
## on the server-specified order instead of the client-specified order,
|
||
## hence enforcing the (usually more properly configured) security
|
||
## ordering of the server administrator.
|
||
##
|
||
## Value: on | off
|
||
## listener.ssl.external.honor_cipher_order = on
|
||
|
||
## Use the CN, DN or CRT field from the client certificate as a username.
|
||
## Notice that 'verify' should be set as 'verify_peer'.
|
||
##
|
||
## Value: cn | dn | crt
|
||
## listener.ssl.external.peer_cert_as_username = cn
|
||
|
||
## TCP backlog for the SSL connection.
|
||
##
|
||
## See listener.tcp.$name.backlog
|
||
##
|
||
## Value: Number >= 0
|
||
## listener.ssl.external.backlog = 1024
|
||
|
||
## The TCP send timeout for the SSL connection.
|
||
##
|
||
## See listener.tcp.$name.send_timeout
|
||
##
|
||
## Value: Duration
|
||
## listener.ssl.external.send_timeout = 15s
|
||
|
||
## Close the SSL connection if send timeout.
|
||
##
|
||
## See: listener.tcp.$name.send_timeout_close
|
||
##
|
||
## Value: on | off
|
||
## listener.ssl.external.send_timeout_close = on
|
||
|
||
## The TCP receive buffer(os kernel) for the SSL connections.
|
||
##
|
||
## See: listener.tcp.$name.recbuf
|
||
##
|
||
## Value: Bytes
|
||
## listener.ssl.external.recbuf = 4KB
|
||
|
||
## The TCP send buffer(os kernel) for internal MQTT connections.
|
||
##
|
||
## See: listener.tcp.$name.sndbuf
|
||
##
|
||
## Value: Bytes
|
||
## listener.ssl.external.sndbuf = 4KB
|
||
|
||
## The size of the user-level software buffer used by the driver.
|
||
##
|
||
## See: listener.tcp.$name.buffer
|
||
##
|
||
## Value: Bytes
|
||
## listener.ssl.external.buffer = 4KB
|
||
|
||
## Sets the 'buffer = max(sndbuf, recbuf)' if this option is enabled.
|
||
##
|
||
## See: listener.tcp.$name.tune_buffer
|
||
##
|
||
## Value: on | off
|
||
## listener.ssl.external.tune_buffer = off
|
||
|
||
## The TCP_NODELAY flag for SSL connections.
|
||
##
|
||
## See: listener.tcp.$name.nodelay
|
||
##
|
||
## Value: true | false
|
||
## listener.ssl.external.nodelay = true
|
||
|
||
## The SO_REUSEADDR flag for MQTT/SSL Listener.
|
||
##
|
||
## Value: true | false
|
||
listener.ssl.external.reuseaddr = true
|
||
|
||
##--------------------------------------------------------------------
|
||
## External WebSocket listener for MQTT protocol
|
||
|
||
## listener.ws.$name is the IP address and port that the MQTT/WebSocket
|
||
## listener will bind.
|
||
##
|
||
## Value: IP:Port | Port
|
||
##
|
||
## Examples: 8083, 127.0.0.1:8083, ::1:8083
|
||
listener.ws.external = 8083
|
||
|
||
## The path of WebSocket MQTT endpoint
|
||
##
|
||
## Value: URL Path
|
||
listener.ws.external.mqtt_path = /mqtt
|
||
|
||
## The acceptor pool for external MQTT/WebSocket listener.
|
||
##
|
||
## Value: Number
|
||
listener.ws.external.acceptors = 4
|
||
|
||
## Maximum number of concurrent MQTT/WebSocket connections.
|
||
##
|
||
## Value: Number
|
||
listener.ws.external.max_connections = 102400
|
||
|
||
## Maximum MQTT/WebSocket connections per second.
|
||
##
|
||
## Value: Number
|
||
listener.ws.external.max_conn_rate = 1000
|
||
|
||
## Simulate the {active, N} option for the MQTT/WebSocket connections.
|
||
##
|
||
## Value: Number
|
||
listener.ws.external.active_n = 100
|
||
|
||
## Rate limit for the MQTT/WebSocket connections.
|
||
##
|
||
## Value: Limit,Duration
|
||
## Default: 100KB incoming per 10 seconds.
|
||
## listener.ws.external.rate_limit = 100KB,10s
|
||
|
||
## Zone of the external MQTT/WebSocket listener belonged to.
|
||
##
|
||
## Value: String
|
||
listener.ws.external.zone = external
|
||
|
||
## The access control for the MQTT/WebSocket listener.
|
||
##
|
||
## See: listener.ws.$name.access
|
||
##
|
||
## Value: ACL Rule
|
||
listener.ws.external.access.1 = allow all
|
||
|
||
## Verify if the protocol header is valid. Turn off for WeChat MiniApp.
|
||
##
|
||
## Value: on | off
|
||
listener.ws.external.verify_protocol_header = on
|
||
|
||
## Use X-Forwarded-For header for real source IP if the EMQ X cluster is
|
||
## deployed behind NGINX or HAProxy.
|
||
##
|
||
## Value: String
|
||
## listener.ws.external.proxy_address_header = X-Forwarded-For
|
||
|
||
## Use X-Forwarded-Port header for real source port if the EMQ X cluster is
|
||
## deployed behind NGINX or HAProxy.
|
||
##
|
||
## Value: String
|
||
## listener.ws.external.proxy_port_header = X-Forwarded-Port
|
||
|
||
## Enable the Proxy Protocol V1/2 if the EMQ cluster is deployed behind
|
||
## HAProxy or Nginx.
|
||
##
|
||
## See: listener.ws.$name.proxy_protocol
|
||
##
|
||
## Value: on | off
|
||
## listener.ws.external.proxy_protocol = on
|
||
|
||
## Sets the timeout for proxy protocol.
|
||
##
|
||
## See: listener.ws.$name.proxy_protocol_timeout
|
||
##
|
||
## Value: Duration
|
||
## listener.ws.external.proxy_protocol_timeout = 3s
|
||
|
||
## The TCP backlog of external MQTT/WebSocket Listener.
|
||
##
|
||
## See: listener.ws.$name.backlog
|
||
##
|
||
## Value: Number >= 0
|
||
listener.ws.external.backlog = 1024
|
||
|
||
## The TCP send timeout for external MQTT/WebSocket connections.
|
||
##
|
||
## See: listener.ws.$name.send_timeout
|
||
##
|
||
## Value: Duration
|
||
listener.ws.external.send_timeout = 15s
|
||
|
||
## Close the MQTT/WebSocket connection if send timeout.
|
||
##
|
||
## See: listener.ws.$name.send_timeout_close
|
||
##
|
||
## Value: on | off
|
||
listener.ws.external.send_timeout_close = on
|
||
|
||
## The TCP receive buffer(os kernel) for external MQTT/WebSocket connections.
|
||
##
|
||
## See: listener.ws.$name.recbuf
|
||
##
|
||
## Value: Bytes
|
||
## listener.ws.external.recbuf = 2KB
|
||
|
||
## The TCP send buffer(os kernel) for external MQTT/WebSocket connections.
|
||
##
|
||
## See: listener.ws.$name.sndbuf
|
||
##
|
||
## Value: Bytes
|
||
## listener.ws.external.sndbuf = 2KB
|
||
|
||
## The size of the user-level software buffer used by the driver.
|
||
##
|
||
## See: listener.ws.$name.buffer
|
||
##
|
||
## Value: Bytes
|
||
## listener.ws.external.buffer = 2KB
|
||
|
||
## Sets the 'buffer = max(sndbuf, recbuf)' if this option is enabled.
|
||
##
|
||
## See: listener.ws.$name.tune_buffer
|
||
##
|
||
## Value: on | off
|
||
## listener.ws.external.tune_buffer = off
|
||
|
||
## The TCP_NODELAY flag for external MQTT/WebSocket connections.
|
||
##
|
||
## See: listener.ws.$name.nodelay
|
||
##
|
||
## Value: true | false
|
||
listener.ws.external.nodelay = true
|
||
|
||
## The compress flag for external MQTT/WebSocket connections.
|
||
##
|
||
## If this Value is set true,the websocket message would be compressed
|
||
##
|
||
## Value: true | false
|
||
## listener.ws.external.compress = true
|
||
|
||
## The level of deflate options for external MQTT/WebSocket connections.
|
||
##
|
||
## See: listener.ws.$name.deflate_opts.level
|
||
##
|
||
## Value: none | default | best_compression | best_speed
|
||
## listener.ws.external.deflate_opts.level = default
|
||
|
||
## The mem_level of deflate options for external MQTT/WebSocket connections.
|
||
##
|
||
## See: listener.ws.$name.deflate_opts.mem_level
|
||
##
|
||
## Valid range is 1-9
|
||
## listener.ws.external.deflate_opts.mem_level = 8
|
||
|
||
## The strategy of deflate options for external MQTT/WebSocket connections.
|
||
##
|
||
## See: listener.ws.$name.deflate_opts.strategy
|
||
##
|
||
## Value: default | filtered | huffman_only | rle
|
||
## listener.ws.external.deflate_opts.strategy = default
|
||
|
||
## The deflate option for external MQTT/WebSocket connections.
|
||
##
|
||
## See: listener.ws.$name.deflate_opts.server_context_takeover
|
||
##
|
||
## Value: takeover | no_takeover
|
||
## listener.ws.external.deflate_opts.server_context_takeover = takeover
|
||
|
||
## The deflate option for external MQTT/WebSocket connections.
|
||
##
|
||
## See: listener.ws.$name.deflate_opts.client_context_takeover
|
||
##
|
||
## Value: takeover | no_takeover
|
||
## listener.ws.external.deflate_opts.client_context_takeover = takeover
|
||
|
||
## The deflate options for external MQTT/WebSocket connections.
|
||
##
|
||
## See: listener.ws.$name.deflate_opts.server_max_window_bits
|
||
##
|
||
## Valid range is 8-15
|
||
## listener.ws.external.deflate_opts.server_max_window_bits = 15
|
||
|
||
## The deflate options for external MQTT/WebSocket connections.
|
||
##
|
||
## See: listener.ws.$name.deflate_opts.client_max_window_bits
|
||
##
|
||
## Valid range is 8-15
|
||
## listener.ws.external.deflate_opts.client_max_window_bits = 15
|
||
|
||
## The idle timeout for external MQTT/WebSocket connections.
|
||
##
|
||
## See: listener.ws.$name.idle_timeout
|
||
##
|
||
## Value: Duration
|
||
## listener.ws.external.idle_timeout = 60s
|
||
|
||
## The max frame size for external MQTT/WebSocket connections.
|
||
##
|
||
##
|
||
## Value: Number
|
||
## listener.ws.external.max_frame_size = 0
|
||
|
||
##--------------------------------------------------------------------
|
||
## External WebSocket/SSL listener for MQTT Protocol
|
||
|
||
## listener.wss.$name is the IP address and port that the MQTT/WebSocket/SSL
|
||
## listener will bind.
|
||
##
|
||
## Value: IP:Port | Port
|
||
##
|
||
## Examples: 8084, 127.0.0.1:8084, ::1:8084
|
||
listener.wss.external = 8084
|
||
|
||
## The path of WebSocket MQTT endpoint
|
||
##
|
||
## Value: URL Path
|
||
listener.wss.external.mqtt_path = /mqtt
|
||
|
||
## The acceptor pool for external MQTT/WebSocket/SSL listener.
|
||
##
|
||
## Value: Number
|
||
listener.wss.external.acceptors = 4
|
||
|
||
## Maximum number of concurrent MQTT/Webwocket/SSL connections.
|
||
##
|
||
## Value: Number
|
||
listener.wss.external.max_connections = 16
|
||
|
||
## Maximum MQTT/WebSocket/SSL connections per second.
|
||
##
|
||
## See: listener.tcp.$name.max_conn_rate
|
||
##
|
||
## Value: Number
|
||
listener.wss.external.max_conn_rate = 1000
|
||
|
||
## Simulate the {active, N} option for the MQTT/WebSocket/SSL connections.
|
||
##
|
||
## Value: Number
|
||
listener.wss.external.active_n = 100
|
||
|
||
## Rate limit for the MQTT/WebSocket/SSL connections.
|
||
##
|
||
## Value: Limit,Duration
|
||
## Default: 100KB incoming per 10 seconds.
|
||
## listener.wss.external.rate_limit = 100KB,10s
|
||
|
||
## Zone of the external MQTT/WebSocket/SSL listener belonged to.
|
||
##
|
||
## Value: String
|
||
listener.wss.external.zone = external
|
||
|
||
## The access control rules for the MQTT/WebSocket/SSL listener.
|
||
##
|
||
## See: listener.tcp.$name.access.<no>
|
||
##
|
||
## Value: ACL Rule
|
||
listener.wss.external.access.1 = allow all
|
||
|
||
## See: listener.ws.external.verify_protocol_header
|
||
##
|
||
## Value: on | off
|
||
listener.wss.external.verify_protocol_header = on
|
||
|
||
## See: listener.ws.external.proxy_address_header
|
||
##
|
||
## Value: String
|
||
## listener.wss.external.proxy_address_header = X-Forwarded-For
|
||
|
||
## See: listener.ws.external.proxy_port_header
|
||
##
|
||
## Value: String
|
||
## listener.wss.external.proxy_port_header = X-Forwarded-Port
|
||
|
||
## Enable the Proxy Protocol V1/2 support.
|
||
##
|
||
## See: listener.tcp.$name.proxy_protocol
|
||
##
|
||
## Value: on | off
|
||
## listener.wss.external.proxy_protocol = on
|
||
|
||
## Sets the timeout for proxy protocol.
|
||
##
|
||
## See: listener.tcp.$name.proxy_protocol_timeout
|
||
##
|
||
## Value: Duration
|
||
## listener.wss.external.proxy_protocol_timeout = 3s
|
||
|
||
## TLS versions only to protect from POODLE attack.
|
||
##
|
||
## See: listener.ssl.$name.tls_versions
|
||
##
|
||
## Value: String, seperated by ','
|
||
## listener.wss.external.tls_versions = tlsv1.2,tlsv1.1,tlsv1
|
||
|
||
## Path to the file containing the user's private PEM-encoded key.
|
||
##
|
||
## See: listener.ssl.$name.keyfile
|
||
##
|
||
## Value: File
|
||
listener.wss.external.keyfile = /etc/emqx/certs/key.pem
|
||
|
||
## Path to a file containing the user certificate.
|
||
##
|
||
## See: listener.ssl.$name.certfile
|
||
##
|
||
## Value: File
|
||
listener.wss.external.certfile = /etc/emqx/certs/cert.pem
|
||
|
||
## Path to the file containing PEM-encoded CA certificates.
|
||
##
|
||
## See: listener.ssl.$name.cacert
|
||
##
|
||
## Value: File
|
||
## listener.wss.external.cacertfile = /etc/emqx/certs/cacert.pem
|
||
|
||
## See: listener.ssl.$name.dhfile
|
||
##
|
||
## Value: File
|
||
## listener.ssl.external.dhfile = /etc/emqx/certs/dh-params.pem
|
||
|
||
## See: listener.ssl.$name.vefify
|
||
##
|
||
## Value: vefify_peer | verify_none
|
||
## listener.wss.external.verify = verify_peer
|
||
|
||
## See: listener.ssl.$name.fail_if_no_peer_cert
|
||
##
|
||
## Value: false | true
|
||
## listener.wss.external.fail_if_no_peer_cert = true
|
||
|
||
## See: listener.ssl.$name.ciphers
|
||
##
|
||
## Value: Ciphers
|
||
listener.wss.external.ciphers = ECDHE-ECDSA-AES256-GCM-SHA384,ECDHE-RSA-AES256-GCM-SHA384,ECDHE-ECDSA-AES256-SHA384,ECDHE-RSA-AES256-SHA384,ECDHE-ECDSA-DES-CBC3-SHA,ECDH-ECDSA-AES256-GCM-SHA384,ECDH-RSA-AES256-GCM-SHA384,ECDH-ECDSA-AES256-SHA384,ECDH-RSA-AES256-SHA384,DHE-DSS-AES256-GCM-SHA384,DHE-DSS-AES256-SHA256,AES256-GCM-SHA384,AES256-SHA256,ECDHE-ECDSA-AES128-GCM-SHA256,ECDHE-RSA-AES128-GCM-SHA256,ECDHE-ECDSA-AES128-SHA256,ECDHE-RSA-AES128-SHA256,ECDH-ECDSA-AES128-GCM-SHA256,ECDH-RSA-AES128-GCM-SHA256,ECDH-ECDSA-AES128-SHA256,ECDH-RSA-AES128-SHA256,DHE-DSS-AES128-GCM-SHA256,DHE-DSS-AES128-SHA256,AES128-GCM-SHA256,AES128-SHA256,ECDHE-ECDSA-AES256-SHA,ECDHE-RSA-AES256-SHA,DHE-DSS-AES256-SHA,ECDH-ECDSA-AES256-SHA,ECDH-RSA-AES256-SHA,AES256-SHA,ECDHE-ECDSA-AES128-SHA,ECDHE-RSA-AES128-SHA,DHE-DSS-AES128-SHA,ECDH-ECDSA-AES128-SHA,ECDH-RSA-AES128-SHA,AES128-SHA
|
||
|
||
## Ciphers for TLS PSK.
|
||
## Note that 'listener.wss.external.ciphers' and 'listener.wss.external.psk_ciphers' cannot
|
||
## be configured at the same time.
|
||
## See 'https://tools.ietf.org/html/rfc4279#section-2'.
|
||
## listener.wss.external.psk_ciphers = PSK-AES128-CBC-SHA,PSK-AES256-CBC-SHA,PSK-3DES-EDE-CBC-SHA,PSK-RC4-SHA
|
||
|
||
## See: listener.ssl.$name.secure_renegotiate
|
||
##
|
||
## Value: on | off
|
||
## listener.wss.external.secure_renegotiate = off
|
||
|
||
## See: listener.ssl.$name.reuse_sessions
|
||
##
|
||
## Value: on | off
|
||
## listener.wss.external.reuse_sessions = on
|
||
|
||
## See: listener.ssl.$name.honor_cipher_order
|
||
##
|
||
## Value: on | off
|
||
## listener.wss.external.honor_cipher_order = on
|
||
|
||
## See: listener.ssl.$name.peer_cert_as_username
|
||
##
|
||
## Value: cn | dn | crt
|
||
## listener.wss.external.peer_cert_as_username = cn
|
||
|
||
## TCP backlog for the WebSocket/SSL connection.
|
||
##
|
||
## See: listener.tcp.$name.backlog
|
||
##
|
||
## Value: Number >= 0
|
||
listener.wss.external.backlog = 1024
|
||
|
||
## The TCP send timeout for the WebSocket/SSL connection.
|
||
##
|
||
## See: listener.tcp.$name.send_timeout
|
||
##
|
||
## Value: Duration
|
||
listener.wss.external.send_timeout = 15s
|
||
|
||
## Close the WebSocket/SSL connection if send timeout.
|
||
##
|
||
## See: listener.tcp.$name.send_timeout_close
|
||
##
|
||
## Value: on | off
|
||
listener.wss.external.send_timeout_close = on
|
||
|
||
## The TCP receive buffer(os kernel) for the WebSocket/SSL connections.
|
||
##
|
||
## See: listener.tcp.$name.recbuf
|
||
##
|
||
## Value: Bytes
|
||
## listener.wss.external.recbuf = 4KB
|
||
|
||
## The TCP send buffer(os kernel) for the WebSocket/SSL connections.
|
||
##
|
||
## See: listener.tcp.$name.sndbuf
|
||
##
|
||
## Value: Bytes
|
||
## listener.wss.external.sndbuf = 4KB
|
||
|
||
## The size of the user-level software buffer used by the driver.
|
||
##
|
||
## See: listener.tcp.$name.buffer
|
||
##
|
||
## Value: Bytes
|
||
## listener.wss.external.buffer = 4KB
|
||
|
||
## The TCP_NODELAY flag for WebSocket/SSL connections.
|
||
##
|
||
## See: listener.tcp.$name.nodelay
|
||
##
|
||
## Value: true | false
|
||
## listener.wss.external.nodelay = true
|
||
|
||
## The compress flag for external WebSocket/SSL connections.
|
||
##
|
||
## If this Value is set true,the websocket message would be compressed
|
||
##
|
||
## Value: true | false
|
||
## listener.wss.external.compress = true
|
||
|
||
## The level of deflate options for external WebSocket/SSL connections.
|
||
##
|
||
## See: listener.wss.$name.deflate_opts.level
|
||
##
|
||
## Value: none | default | best_compression | best_speed
|
||
## listener.wss.external.deflate_opts.level = default
|
||
|
||
## The mem_level of deflate options for external WebSocket/SSL connections.
|
||
##
|
||
## See: listener.wss.$name.deflate_opts.mem_level
|
||
##
|
||
## Valid range is 1-9
|
||
## listener.wss.external.deflate_opts.mem_level = 8
|
||
|
||
## The strategy of deflate options for external WebSocket/SSL connections.
|
||
##
|
||
## See: listener.wss.$name.deflate_opts.strategy
|
||
##
|
||
## Value: default | filtered | huffman_only | rle
|
||
## listener.wss.external.deflate_opts.strategy = default
|
||
|
||
## The deflate option for external WebSocket/SSL connections.
|
||
##
|
||
## See: listener.wss.$name.deflate_opts.server_context_takeover
|
||
##
|
||
## Value: takeover | no_takeover
|
||
## listener.wss.external.deflate_opts.server_context_takeover = takeover
|
||
|
||
## The deflate option for external WebSocket/SSL connections.
|
||
##
|
||
## See: listener.wss.$name.deflate_opts.client_context_takeover
|
||
##
|
||
## Value: takeover | no_takeover
|
||
## listener.wss.external.deflate_opts.client_context_takeover = takeover
|
||
|
||
## The deflate options for external WebSocket/SSL connections.
|
||
##
|
||
## See: listener.wss.$name.deflate_opts.server_max_window_bits
|
||
##
|
||
## Valid range is 8-15
|
||
## listener.wss.external.deflate_opts.server_max_window_bits = 15
|
||
|
||
## The deflate options for external WebSocket/SSL connections.
|
||
##
|
||
## See: listener.wss.$name.deflate_opts.client_max_window_bits
|
||
##
|
||
## Valid range is 8-15
|
||
## listener.wss.external.deflate_opts.client_max_window_bits = 15
|
||
|
||
## The idle timeout for external WebSocket/SSL connections.
|
||
##
|
||
## See: listener.wss.$name.idle_timeout
|
||
##
|
||
## Value: Duration
|
||
## listener.wss.external.idle_timeout = 60s
|
||
|
||
## The max frame size for external WebSocket/SSL connections.
|
||
##
|
||
## Value: Number
|
||
## listener.wss.external.max_frame_size = 0
|
||
|
||
##--------------------------------------------------------------------
|
||
## Modules
|
||
##--------------------------------------------------------------------
|
||
|
||
##--------------------------------------------------------------------
|
||
## Presence Module
|
||
|
||
## Enable Presence Module.
|
||
##
|
||
## Value: on | off
|
||
module.presence = on
|
||
|
||
## Sets the QoS for presence MQTT message.
|
||
##
|
||
## Value: 0 | 1 | 2
|
||
module.presence.qos = 1
|
||
|
||
##--------------------------------------------------------------------
|
||
## Subscription Module
|
||
|
||
## Enable Subscription Module.
|
||
##
|
||
## Value: on | off
|
||
module.subscription = off
|
||
|
||
## Subscribe the Topics automatically when client connected.
|
||
## module.subscription.1.topic = $client/%c
|
||
## Qos of the subscription: 0 | 1 | 2
|
||
## module.subscription.1.qos = 1
|
||
|
||
## module.subscription.2.topic = $user/%u
|
||
## module.subscription.2.qos = 1
|
||
|
||
##--------------------------------------------------------------------
|
||
## Rewrite Module
|
||
|
||
## Enable Rewrite Module.
|
||
##
|
||
## Value: on | off
|
||
module.rewrite = off
|
||
|
||
## {rewrite, Topic, Re, Dest}
|
||
## module.rewrite.rule.1 = x/# ^x/y/(.+)$ z/y/$1
|
||
## module.rewrite.rule.2 = y/+/z/# ^y/(.+)/z/(.+)$ y/z/$2
|
||
|
||
##-------------------------------------------------------------------
|
||
## Plugins
|
||
##-------------------------------------------------------------------
|
||
|
||
## The etc dir for plugins' config.
|
||
##
|
||
## Value: Folder
|
||
plugins.etc_dir = /etc/emqx/plugins/
|
||
|
||
## The file to store loaded plugin names.
|
||
##
|
||
## Value: File
|
||
plugins.loaded_file = /var/lib/emqx/loaded_plugins
|
||
|
||
## File to store loaded plugin names.
|
||
plugins.expand_plugins_dir = /var/lib/emqx/plugins/
|
||
|
||
##--------------------------------------------------------------------
|
||
## Broker
|
||
##--------------------------------------------------------------------
|
||
|
||
## System interval of publishing $SYS messages.
|
||
##
|
||
## Value: Duration
|
||
## Default: 1m, 1 minute
|
||
broker.sys_interval = 1m
|
||
|
||
## System heartbeat interval of publishing following heart beat message:
|
||
## - "$SYS/brokers/<node>/uptime"
|
||
## - "$SYS/brokers/<node>/datetime"
|
||
##
|
||
## Value: Duration
|
||
## Default: 30s
|
||
broker.sys_heartbeat = 30s
|
||
|
||
## Enable global session registry.
|
||
##
|
||
## Value: on | off
|
||
broker.enable_session_registry = on
|
||
|
||
## Session locking strategy in a cluster.
|
||
##
|
||
## Value: Enum
|
||
## - local
|
||
## - one
|
||
## - quorum
|
||
## - all
|
||
broker.session_locking_strategy = quorum
|
||
|
||
## Dispatch strategy for shared subscription
|
||
##
|
||
## Value: Enum
|
||
## - random
|
||
## - round_robin
|
||
## - sticky
|
||
## - hash
|
||
broker.shared_subscription_strategy = random
|
||
|
||
## Enable/disable shared dispatch acknowledgement for QoS1 and QoS2 messages
|
||
## This should allow messages to be dispatched to a different subscriber in
|
||
## the group in case the picked (based on shared_subscription_strategy) one # is offline
|
||
##
|
||
## Value: Enum
|
||
## - true
|
||
## - false
|
||
broker.shared_dispatch_ack_enabled = false
|
||
|
||
## Enable batch clean for deleted routes.
|
||
##
|
||
## Value: Flag
|
||
broker.route_batch_clean = off
|
||
|
||
##--------------------------------------------------------------------
|
||
## System Monitor
|
||
##--------------------------------------------------------------------
|
||
|
||
## Enable Long GC monitoring. Disable if the value is 0.
|
||
## Notice: don't enable the monitor in production for:
|
||
## https://github.com/erlang/otp/blob/feb45017da36be78d4c5784d758ede619fa7bfd3/erts/emulator/beam/erl_gc.c#L421
|
||
##
|
||
## Value: Duration
|
||
## - h: hour
|
||
## - m: minute
|
||
## - s: second
|
||
## - ms: milliseconds
|
||
##
|
||
## Examples:
|
||
## - 2h: 2 hours
|
||
## - 30m: 30 minutes
|
||
## - 0.1s: 0.1 seconds
|
||
## - 100ms : 100 milliseconds
|
||
##
|
||
## Default: 0ms
|
||
sysmon.long_gc = 0
|
||
|
||
## Enable Long Schedule(ms) monitoring.
|
||
##
|
||
## See: http://erlang.org/doc/man/erlang.html#system_monitor-2
|
||
##
|
||
## Value: Duration
|
||
## - h: hour
|
||
## - m: minute
|
||
## - s: second
|
||
## - ms: milliseconds
|
||
##
|
||
## Examples:
|
||
## - 2h: 2 hours
|
||
## - 30m: 30 minutes
|
||
## - 0.1s: 0.1 seconds
|
||
## - 100ms: 100 milliseconds
|
||
##
|
||
## Default: 0ms
|
||
sysmon.long_schedule = 240ms
|
||
|
||
## Enable Large Heap monitoring.
|
||
##
|
||
## See: http://erlang.org/doc/man/erlang.html#system_monitor-2
|
||
##
|
||
## Value: bytes
|
||
##
|
||
## Default: 8M words. 32MB on 32-bit VM, 64MB on 64-bit VM.
|
||
sysmon.large_heap = 8MB
|
||
|
||
## Enable Busy Port monitoring.
|
||
##
|
||
## See: http://erlang.org/doc/man/erlang.html#system_monitor-2
|
||
##
|
||
## Value: true | false
|
||
sysmon.busy_port = false
|
||
|
||
## Enable Busy Dist Port monitoring.
|
||
##
|
||
## See: http://erlang.org/doc/man/erlang.html#system_monitor-2
|
||
##
|
||
## Value: true | false
|
||
sysmon.busy_dist_port = true
|
||
|
||
## The time interval for the periodic cpu check
|
||
##
|
||
## Value: Duration
|
||
## -h: hour, e.g. '2h' for 2 hours
|
||
## -m: minute, e.g. '5m' for 5 minutes
|
||
## -s: second, e.g. '30s' for 30 seconds
|
||
##
|
||
## Default: 60s
|
||
os_mon.cpu_check_interval = 60s
|
||
|
||
## The threshold, as percentage of system cpu, for how much system cpu can be used before the corresponding alarm is set.
|
||
##
|
||
## Default: 80%
|
||
os_mon.cpu_high_watermark = 80%
|
||
|
||
## The threshold, as percentage of system cpu, for how much system cpu can be used before the corresponding alarm is clear.
|
||
##
|
||
## Default: 60%
|
||
os_mon.cpu_low_watermark = 60%
|
||
|
||
## The time interval for the periodic memory check
|
||
##
|
||
## Value: Duration
|
||
## -h: hour, e.g. '2h' for 2 hours
|
||
## -m: minute, e.g. '5m' for 5 minutes
|
||
## -s: second, e.g. '30s' for 30 seconds
|
||
##
|
||
## Default: 60s
|
||
os_mon.mem_check_interval = 60s
|
||
|
||
## The threshold, as percentage of system memory, for how much system memory can be allocated before the corresponding alarm is set.
|
||
##
|
||
## Default: 70%
|
||
os_mon.sysmem_high_watermark = 70%
|
||
|
||
## The threshold, as percentage of system memory, for how much system memory can be allocated by one Erlang process before the corresponding alarm is set.
|
||
##
|
||
## Default: 5%
|
||
os_mon.procmem_high_watermark = 5%
|
||
|
||
## The time interval for the periodic process limit check
|
||
##
|
||
## Value: Duration
|
||
##
|
||
## Default: 30s
|
||
vm_mon.check_interval = 30s
|
||
|
||
## The threshold, as percentage of processes, for how many processes can simultaneously exist at the local node before the corresponding alarm is set.
|
||
##
|
||
## Default: 80%
|
||
vm_mon.process_high_watermark = 80%
|
||
|
||
## The threshold, as percentage of processes, for how many processes can simultaneously exist at the local node before the corresponding alarm is clear.
|
||
##
|
||
## Default: 60%
|
||
vm_mon.process_low_watermark = 60%
|
||
|
||
|